News

Large-Scale Wheeled Organic Fertilizer Turner

Zhengzhou Chengxiang Heavy Industry, a professional manufacturer of fertilizer equipment, produces a Large-Scale Wheeled Organic Fertilizer Turner. This machine is designed for the fermentation of organic waste—such as livestock and poultry manure, sludge, municipal waste, sugar mill filter mud, biogas residue, straw, and sawdust—in large-span and deep-pit settings. It is widely used in organic and compound fertilizer plants, as well as in the fermentation and dewatering processes for mushroom cultivation. Compared to traditional trough-type turners, this equipment offers significant space savings, a wider turning range, greater working depth, and higher operational efficiency.

How does a Large-Scale Wheeled Organic Fertilizer Turner?

The Large-Scale Wheeled Organic Fertilizer Turner utilizes a central chain drive mechanism to rotate two turning wheels—positioned symmetrically—ensuring complete coverage with no “dead zones.” The machine’s travel speed and lateral positioning can be adjusted, allowing it to handle large-scale composting operations with high efficiency and low energy consumption.

For deep-pile composting, the equipment employs a unique, energy-efficient drive mechanism that enables deep-reaching, wide-span turning operations while requiring less power. Its hydraulic lifting system allows for the adjustment of the turning blades and facilitates automatic raising and lowering, ensuring the machine can move across the site without obstruction.

Furthermore, an integrated, fully automatic electrical control system ensures the equipment is easy to operate, safe, and reliable. The turning wheels can also be configured with different spans to accommodate the specific width of the compost piles.

5

The Importance of Large-Scale Wheeled Organic Fertilizer Turner in Composting Production

1. Adjusting the Composition of Composting Raw Materials

In fertilizer production, auxiliary materials are often added to adjust parameters such as the carbon-to-nitrogen (C/N) ratio, pH level, and moisture content of the raw materials. By combining the primary raw materials with these auxiliary components and using a fertilizer turner to mix them, the desired composition can be achieved.

2. Improving Compost Permeability

The turning process breaks down materials into smaller fragments, transforming dense, compacted piles into a loose, resilient structure with an optimal level of porosity.

3. Adjusting the Moisture Content of the Raw Material Pile

The ideal moisture content for the fermentation of raw materials is approximately 65%, while the standard moisture content for finished organic fertilizer is below 30%. During fermentation, biochemical reactions generate additional water; furthermore, as microorganisms consume the raw materials, water that was previously bound within the material is released. Consequently, moisture levels must be reduced during the fertilizer production process. This is achieved not only through evaporation driven by heat transfer but also through the forced release of water vapor as the composting material undergoes active decomposition.

3

Operating Instructions For Large-Scale Wheeled Organic Fertilizer Turner

During operation, the rotating disc and the throwing mechanism come into direct contact with the material, which is often highly corrosive. Therefore, any debris or buildup—especially on the chassis—must be cleaned off promptly. If the protective paint begins to peel, the affected areas should be repainted.

The tension of the drive chains on the arge-Scale Wheeled Organic Fertilizer Turner must be checked and adjusted regularly. If the tension cannot be brought within the required range through adjustment, links may need to be removed. If any stiffness or restricted movement is observed between the chain links, they should be lubricated immediately with grease or machine oil.

Before using the gearbox, ensure it contains the proper amount of oil. The oil should be changed after the first 100 hours of operation, and subsequently every 1,000 hours of operation (or at least once a year).

After 200 hours of operation, the hydraulic system should be drained of all hydraulic fluid; the filter should be cleared of impurities, and the filter element replaced. Whether the drained hydraulic fluid can be reused depends on its cleanliness. When draining the hydraulic fluid, ensure that the hydraulic cylinder rods are fully retracted into the cylinder barrels. The hydraulic system of Large-Scale Wheeled Organic Fertilizer Turner should be cleaned every 800 hours of operation.

2

Zhengzhou Chengxiang Heavy Industry – Professional Fertilizer Equipment Manufacturer

Zhengzhou Chengxiang Heavy Industry is a well-known supplier of disc granulators and other fertilizer equipment in China. We are committed to producing professional, high-quality, and efficient fertilizer equipment. We utilize advanced technology and design to manufacture fertilizer granulators and fertilizer production lines, and can add other equipment or provide customized designs to meet your needs. At Zhengzhou Chengxiang Heavy Industry, you are sure to find your ideal fertilizer equipment. Furthermore, if you encounter any problems or have any needs during production using our fertilizer equipment, we provide 24-hour assistance.

Zhengzhou Chengxiang Heavy Industry mainly supplies: organic fertilizer production lines, compound fertilizer production lines, BB fertilizer production lines and supporting equipment. We design and provide a complete production line for you. Please rest assured that as a fertilizer equipment manufacturer with 30 years of export experience, we have the ability and confidence to satisfy you with our products. Welcome to visit our factory and purchase equipment.

Get Price

    Home Tel Mail Inquiry